Velvet Ribbon Chain Garland (Easy $8 Christmas Tree DIY)

There is something about a Christmas tree in a quiet living room that makes me want to slow down. The lights are on, the ornaments we love are in their places, and I always find myself looking for one more layer that feels special without turning the season into a spending project. This year, that layer was a velvet ribbon chain garland.

I turned a $7.99 spool of red velvet ribbon from HomeGoods into a Ralph Lauren-inspired garland with nothing more than scissors and a mini stapler. It is the prettiest $8 Christmas DIY I have made, and it is the kind of budget Christmas decor that gives you that old money feel for everyday life. Cut, staple, drape. That is the whole method.

If you have ever wanted that classic, collected Christmas look without the classic price tag, this is your reminder: decor doesn’t have to be expensive to look expensive.

This post contains affiliate links. If you shop through them, I may earn a small commission at no extra cost to you. Thank you for supporting our family and this little corner of the internet.

A lit Christmas tree with a red velvet ribbon chain garland draped diagonally through the branches beside a fireplace
Our finished velvet ribbon chain garland, draped in soft waves through the tree.

What You’ll Need

You only need three things:

  • 2 inch wide velvet ribbon. I used a solid red velvet, 2 inches wide. Here is the red velvet ribbon I recommend (10-yard rolls).
  • Scissors. Any sharp pair will give you a clean cut on velvet.
  • A mini stapler and staples. It is small, quick, and easy to hold while you work.

No glue and no tape. The stapler is fast and sturdy, and it is simple enough that the kids can help with the cutting while you handle the stapling.

A hand holding a spool of solid red velvet ribbon in front of a lit Christmas tree
The whole project started with one spool of red velvet ribbon.

How Much Ribbon Do You Need?

For a 9-foot tree, plan on about 15 to 16 yards of ribbon. Since the ribbon I recommend comes in 10-yard rolls, that means two rolls for a tree that size, with a little left over for gift wrap.

For a smaller tree or a lighter drape, one roll may be plenty. My best advice is to make your chain, drape it as you go, and add links until it looks right to you. It is always easier to have a little ribbon left over than to run out halfway down the tree.

How to Make a Velvet Ribbon Chain Garland

Think of the paper chains you made as a kid, just made in velvet. It is an easy evening project, and it goes quickly once you find your rhythm.

1. Cut your strips

Cut the ribbon into strips about 8 inches long. Once your first strip is cut, lay it on top of the ribbon and use it as your guide so every link matches.

Hands lining up a cut strip of red velvet ribbon on a chevron ottoman to use as a cutting guide
Cut strips about 8 inches long, then use the first one as your guide so every link matches.
Scissors cutting a strip of red velvet ribbon while a child's hand holds the ribbon steady
One of the kids helped me cut the strips. The sweetest kind of Christmas project.

2. Make the first link

Bring the two ends of a strip together, overlapping them slightly with the velvet side facing out, and staple it closed to make a loop.

3. Add the next link

Thread a new strip through the first loop, overlap its ends the same way, and staple it closed. That is your chain.

Hands threading a new strip of red velvet ribbon through the previous loop of a ribbon chain garland
Thread each new strip through the last loop.
Hands stapling the ends of a red velvet ribbon loop closed with a light blue mini stapler
A mini stapler is all you need to close each link.

4. Keep going

Repeat, looping each new strip through the previous one and stapling it closed, until the chain is as long as you want it.

5. Drape it on the tree

Turn each link so the staple faces the back of the tree, then drape the garland through the branches. Once it is on the tree, all you see is soft velvet.

How to Style It

I draped our garland diagonally around the tree, letting it sweep across the front in soft waves and tucking it in and out of the branches. It looks so cozy with warm white lights, and the red velvet feels rich against the green.

Close-up of a red velvet ribbon chain garland on a lit Christmas tree showing the soft linked loops
A closer look at those soft velvet links on the tree.
  • Keep it loose. The charm is in the soft, relaxed swoops, not a tight, perfect spiral.
  • Hide the seams. If a staple peeks out, give that link a little turn so the seam sits toward the back.
  • Tuck it in. If a section slips, push it a little deeper into the branches so it settles.
  • Pair it with classic pieces. Red velvet with greenery, warm lights, and a few family ornaments is that timeless, Ralph Lauren-inspired look.
  • Use the leftovers. A few extra links tied around a wrapped gift make even a simple package feel special.

Velvet Ribbon Chain Garland FAQ

How much ribbon do I need for a 9-foot tree?

About 15 to 16 yards, so plan on two 10-yard rolls.

Do the staples show?

Not if you turn each link so the stapled side faces the back of the tree. From the front, you just see velvet.

What supplies do I need?

2 inch wide velvet ribbon, scissors, and a mini stapler. That is it.

How long should I cut the ribbon strips?

About 8 inches long. With 2 inch wide ribbon, that makes full, soft links that look lovely on the tree.

Is this a good project to do with kids?

Yes. Little hands can help hold the ribbon and line up strips while a grown-up does the cutting and stapling. It turned into a sweet memory for us.

More Christmas at Home

If you are settling into the season with me, these are a few more from around our home:

I would love to see your garland if you make one. Tell me in the comments what color ribbon you chose!

With love,
Tere

Follow:
Share:

what are your thoughts?

This site uses Akismet to reduce spam. Learn how your comment data is processed.